Indoor Positioning System Using Accelerometry and High Accuracy Heading Sensors

J. Collin, O. Mezentsev, G. Lachapelle

Abstract:	The current GPS signal structure and signal power levels are barely sufficient for indoor applications. Recent developments in high sensitivity receiver technology are promising for indoor positioning inside light structures such as wooden frame houses but generally not for concrete high rise buildings. Errors due to multipath and noise associated with weak indoor signals limit the accuracy and availability of GNSS in difficult indoor environments. An alternate approach makes use of inertial technologies. However, the use of a strapdown inertial navigation system (INS) system and its traditional mechanization as a personal indoor positioning system is rather unrealistic due to the rapidly growing positioning errors caused by gyro drifts. Even a high performance INS will cause hundreds of metres of positioning error in 30 minutes without GPS updates. The majority of previously proposed personal positioning systems utilize the Pedestrian Dead Reckoning (PDR) approach. These systems use accelerometers for step detection and step length estimation and magnetic compasses or low cost gyros for heading determination. In such systems, the error sources are the step length estimation error and the heading error. Assuming no heading error, the positioning error is directly proportional to the number of steps and, thus, to the distance traveled. However, the critical component of these systems is heading. Indoor, apart from measuring the Earth's magnetic field, magnetic sensors will be subject to other local electromagnetic fields. Over time, low cost gyros will drift in a significant and unpredictable manner which makes them unsuitable for obtaining adequate heading information. In this paper, the heading problem is resolved by using one deg/hour ring laser gyros. A tactical-grade IMU is used to provide accurate heading information, and accelerometers are used only for step occurrence detection. A special study is carried out to examine errors in heading, if only one gyro is used instead of three. In this case, the three-gyro solution is used as a reference. To test the concept, several long period tests were performed, carrying the IMU in a backpack. Both DGPS and stand-alone receivers were included to compare two different level initialization sources. 3D-gyro heading solutions initialized with DGPS are promising. However, if only one gyro is used or DGPS is not available, heading solution accuracy degrades significantly. Size restrictions on current ring laser gyros limit the application of the proposed system. However, as gyro technology evolves, such a system may be beneficial for applications such as the positioning of rescue workers, police squads, and other indoor location and navigation applications.
Published in:	Proceedings of the 16th International Technical Meeting of the Satellite Division of The Institute of Navigation (ION GPS/GNSS 2003) September 9 - 12, 2003 Oregon Convention Center Portland, OR
Pages:	1164 - 1170
Cite this article:	Collin, J., Mezentsev, O., Lachapelle, G., "Indoor Positioning System Using Accelerometry and High Accuracy Heading Sensors," Proceedings of the 16th International Technical Meeting of the Satellite Division of The Institute of Navigation (ION GPS/GNSS 2003), Portland, OR, September 2003, pp. 1164-1170.
Full Paper:	ION Members/Non-Members: 1 Download Credit Sign In