| Abstract: | In global navigation satellite system (GNSS)-denied environments such as tunnels and canyons, the inertial navigation system (INS) in GNSS/INS navigation propagates independently, and errors of microelectromechanical systems (MEMS)-grade sensors commonly used in railway navigation accumulate rapidly. To address this problem, this paper proposes a one-dimensional INS/odometer recursive navigation (1D-IORN) method for railway trains. By exploiting track-constrained motion, the conventional 15-state navigation model is reduced to a 6-state vector containing along-track mileage, speed, pitch, roll, forward accelerometer bias, and pitch-axis gyroscope bias. A dual-observation structure combines odometer-speed measurements with a vertical-acceleration gravity-projection constraint to provide complementary speed and attitude corrections. The speed state is defined directly along the track and is naturally aligned with the odometer measurement, avoiding the attitude-dependent transformation of odometer speed into the navigation frame. An extended Kalman filter (EKF) recursively estimates the reduced navigation states and sensor biases and provides auxiliary roll and online sensor-bias estimates. Field tests using 30 km of train data from the Qinghai-Tibet Railway were conducted under full GNSS denial and continuous odometer-speed availability. Compared with a conventional 15-state INS/odometer loosely coupled scheme, the proposed method reduced the mileage root-mean-square error (RMSE) from 16.073 to 1.335 m, the speed RMSE from 0.0758 to 0.0132 m/s, and the pitch RMSE from 4.3570° to 0.1095°. The proposed method also yielded lower mileage, speed, and pitch errors than a 15-state multiplicative extended Kalman filter (MEKF) using odometer and non-holonomic constraints (NHC). This improvement can be attributed to the reduced state dimension and direct speed-observation alignment. A simulated 30 s odometer-speed outage experiment further showed that the proposed method reduced the full-segment mileage RMSE from 28.34 m for pure odometer propagation to 2.85 m and the outage-window mileage RMSE from 35.88 to 14.61 m. These results demonstrate accurate along-track navigation and improved short-term continuity and recovery capability under temporary odometer unavailability. |
| Published in: |
Proceedings of the 39th International Technical Meeting of the Satellite Division of the Institute of Navigation (ION GNSS+ 2026) September 14 - 18, 2026 Hyatt Regency Grand Cypress Orlando, Florida |
| Pages: | 631 - 645 |
| Cite this article: | Zhang, Yaopeng, Jiang, Wei, Wang, Jian, Cai, Baigen, Liu, Jiang, Ba, Xiaohui, Lu, Debiao, "1D INS/ODO Recursive Navigation Method for Railway Trains in GNSS-Denied Environments," Proceedings of the 39th International Technical Meeting of the Satellite Division of the Institute of Navigation (ION GNSS+ 2026), Orlando, Florida, September 2026, pp. 631-645. https://doi.org/10.33012/2026.20777 |
| Full Paper: |
Sign in to download with your ION membership, download credits or subscription, or buy this article. Sign In Buy this article: $12 for ION members, $35 for non-members |
| References: |
Show 14 references
|