SiTime

Booth 22

Sales Contact:
Kevin Jachec
Sr. Sales Manager, Aerospace-Defense
kjachec@sitime.com

Website: sitime.com

Address:
5451 Patrick Henry Dr
Santa Clara, CA 95054

About Us:
SiTime Corporation is the precision timing company. Our programmable solutions offer a rich feature set that enables customers to differentiate their products with higher performance, smaller size, lower power, and better reliability. With over 3 billion devices shipped, SiTime is changing the timing industry.

The SiTime Endura™ ruggedized oscillators are built for aerospace and defense applications that demand ultra-high resiliency to a wide range of harsh environmental conditions. These silicon MEMS-based devices deliver the lowest acceleration sensitivity, best shock and vibration resistance, high-reliability (>2.2 billion hours MTBF), and superior dynamic performance under airflow, thermal gradients, pressure, and power supply noise.

Endura products can be factory-programmed to any combination of frequency, stability, and voltage within a wide range of parameters, eliminating the long lead times and customization costs associated with quartz products. All Endura oscillators are 100% screened through the SiTime Endura process flow to provide high reliability.

Endura Super-TCXOs
- Precision timing over high temperature | ±10 ppb up to 105°C
- Airflow and thermal shock resistant | 1 ppb/°C
- Low acceleration sensitivity | as low as 0.004 ppb/g (typical)

Endura Single Ended Oscillators
- Vibration resistant | 0.1 ppb/g
- Wide operating temperature | -55 to +125°C
- Small industry-standard packages | as small as 2.0 mm x 1.6 mm

Endura Spread Spectrum Oscillators
- Electromagnetic interference (EMI) reduction | up to 30 dB
- Vibration resistant | 0.1 ppb/g
- Wide operating temperature | -55 to +125°C
- Small industry-standard packages | as small as 2.0 mm x 1.6 mm

Endura Differential Oscillators
- Low jitter | 0.2 ps RMS (12k to 20MHz)
- Precise frequency steering | digital tuning to ±5 ppt
- Vibration resistant | 0.1 ppb/g
- Industry-standard packages | as small as 3.2 mm x 2.5 mm

Endura DCXOs (digitally controlled oscillators)
- Immune to analog noise | in-system programmable via I2C
- Wide pull range | up to ±3200 ppm
- Precise frequency steering | digital tuning to ±5 ppt
- Best pull range linearity | <1%
- Low jitter | 0.2 ps RMS (12k to 20MHz)

Endura VCXOs (voltage controlled oscillators)
- Wide pull range | ±25 to ±3200 ppm
- Low jitter | 0.2 ps RMS (12k to 20MHz)
- Best pull range linearity | <1%
- Low power supply noise rejection (PSNR) | 0.05 ps/mV