Previous Abstract Return to Session C2 Next Abstract

Session C2: Vision/Integrated Navigation Systems

Image-Assisted GNSS/INS Navigation for UAV-based Mobile Mapping Systems During GNSS Outages
Magdy Elbahnasawy, Tamer Shamseldin, and Ayman Habib
Location: Windjammer

Nowadays, unmanned aerial vehicles (UAVs) have evolved into an alternative to traditional mapping platforms for some applications due to their flexibility and cost savings. Most UAVs, which are used as mobile mapping systems (MMS), depend on utilizing position and orientation system (POS) onboard the platform. Usually, POS consists of Global Navigation Satellite System (GNSS) as a positioning sensor
integrated with an Inertial Navigation System (INS), which encompasses Inertial Measurement Unit (IMU) as an orientation sensor. This GNSS/INS integration is usually performed in either a loosely coupled (LC) or a tightly coupled (TC) scheme. Although LC is a simple scheme that uses the GNSS solutions to aid the INS
navigation, TC has the advantage of being able to integrate raw GNSS measurements and INS when less than four GNSS satellites are tracked, which makes it a better candidate for more MMS applications. However, for some environments with large GNSS outages, especially where no satellites are tracked, TC architecture is still not a convenient solution, even with using smoother afterward.
In this research, a low-cost UAV MMS is developed combining an inexpensive POS, a camera, and a spinning multi-beam LiDAR for different mapping applications. In addition, a processing strategy is proposed to refine the trajectory during GNSS outages. This strategy comprises applying a two-stage Kalman filter along with smoother. The first stage is a TC scheme KF followed by a smoother using GNSS and INS measurements as inputs. The second stage is a LC scheme KF utilizing the output from the first stage and a vision-based trajectory to aid trajectory refinement during GNSS outages. The vision-based trajectory is derived from integrated sensor orientation (ISO) based on using a bundle adjustment (BA) procedure for a collected block of images for the area of interest, without using any ground control points. This technique enhances the accuracy of the estimated position by 50% in the planimetric direction and 25% in the vertical direction during GNSS outages. In addition, the estimated heading accuracy of the platform is enhanced by 25%. The derived vision-aided GNSS/INS trajectory is used to derive more accurate georeferenced information from other sensors, such as LiDAR, onboard mapping platform. Finally, quantitative
and quantitative quality control are conducted to evaluate the vision-aided GNSS/INS trajectory derived from the proposed processing strategy.



Previous Abstract Return to Session C2 Next Abstract