Towards Vision Based Navigation in Hypersonic Environments
Jonathan Ryan, Miles Smith, Todd Klaput, Doug Hudson, Steve Barr, Jim Trolier, Leidos
Location: Room 1-3
Alternate Number 1
Overview
Leidos demonstrated viability of its mature vision-based navigation (VBN) software for hypersonic platforms in GPS-contested environments through high-fidelity simulation of VBN on a hypersonic vehicle with a ground-facing optical sensor. Aero-optic (AO) phenomena were simulated using Computational Fluid Dynamics (CFD) software which predicted impacts of the AO environment on imagery blur, boresight error, and radiance. These simulation predictions were supported by hypersonic ground testing at CUBRC’s Large Energy National Shock (LENS I) facility. Having supported the AO environment predictions, Leidos produced simulated camera imagery, distorted according to the validated models, to verify the impact to VBN. These simulations predicted low impact from aero-optic (AO) phenomena in hypersonic flight at representative speeds and altitudes.
Background and Key Innovations
Leidos’ Assured Data Engine for Position and Timing (ADEPT) improves navigation of airborne platforms in GPS-contested environments. ADEPT has been demonstrated on multiple manned and unmanned platforms, up to TRL 9 for numerous sub-sonic applications. VBN is the subsystem of ADEPT that matches live sensor imagery to georeferenced aerial imagery databases stored in the onboard processor to generate measurements to improve the solution of an onboard inertial navigation system, resulting in an absolute bounding of vertical and horizontal navigation error.
HVBN is the first application of Leidos VBN capability at the extreme altitudes and velocities of hypersonic flight. This introduces uniquely high sensitivity to attitude errors, ground sample distance (GSD) and resolution, and size of stored reference map imagery. Hypersonic flight also introduces aero-optical, aero-thermal, and aero-structural phenomena not present at lower velocities that all negatively impact sensor imagery.
The objectives of the HVBN effort were the following:
• Demonstrate viability of Leidos VBN in hypersonic flight through modeling and simulation to evaluate VBN performance against simulated hypersonic imagery
• Verify M&S results through ground tunnel and HWIL test
Test Methodology
HVBN simulation used a hypersonic boost-glide trajectory which reached representative speeds and altitudes. This trajectory was placed over CONUS, where the high resolution NAIP satellite imagery database could be used to generate simulated live imagery. VBN software uses this generated live image stream as inputs to update simulated INS measurements taken along the trajectory.
To assess the impact of aero-optical effects, Leidos generated a case matrix for high-fidelity CFD analysis to cover Mach numbers and altitudes of the input trajectory. Flowfield data was generated using NASA’s VULCAN CFD program. Calculation of optical path difference (OPD) from the aperture through the flowfield were used to estimate boresight error and blur intensity for each case tested. Aero-thermal and structural effects were estimated in Aria and Sierra SD solvers respectively, using an optical sensor and window assembly model by calculating OPD from sensor to window under thermal and structural deformation.
The aero-optical effects could be supported through ground tunnel testing in the CUBRC LENS shock tunnel facility and verified with further testing. A scale model of the hypersonic vehicle is placed in a shock tunnel, where OPD can be measured directly using an optical laser along the aperture line of sight. Tests were run to match the CFD case matrix velocity, altitude, and attitude.
An image deformation model applied these verified aero-optical effects into simulated live imagery. Boresight error, blur intensity, and shock layer radiance were parametrically applied as a series of 2D convolutions to each simulated live image along the trajectory. Leidos VBN could then be run with both the original undistorted and distorted image streams to compare position error and feature identification.
Results
Leidos VBN software performs as expected when applied to simulated hypersonic flight. Accuracy numbers will be shown during the presentation. Aero-optical effects from hypersonic flight do not significantly impact position error and fix availability, and aero-optical effects present less error than is introduced by attitude bias and trigonometric camera projection at high altitude. Limit testing showed that aero-optical effects needed to be increased by 5-10x the 95th percentile boresight error and blur intensity in order to see a significant drop in VBN performance.
Conclusions and Significance
Leidos has developed a simulation methodology and design process for identifying a VBN solution that is flight test ready. The study indicates that Leidos VBN solution is a potentially viable aPNT solution for hypersonic platforms with a ground-facing camera flying over land. This can bound errors for a hypersonic midcourse or terminal phase for aiding navigation in a GPS-denied environment.